10
Warning:
Use only the provided adaptor, using other power supplies may cause
a hazard.
Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket. Never try to lengthen the
mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
7.2
Installing and charging the batteries (see P3)
Place the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided.
Position the battery compartment cover over the batteries and slide
up to click into place.
Put the handset on the base and charge for 15 hours before using
the handset for the first time. The handset will give a beep when it is
properly placed on the base or charger.
8
USING YOUR PHONE
8.1
Make a call
8.1.1
Preparatory dialing
Enter the phone number (up to 24 digits) and press or
to line and dial the number. When entering the number, if you make a
mistake, press
8.1.2
Direct dialling
Press or
to connect to the line and then enter the phone number.
Note:
If you enter a wrong digit, you cannot correct it with the
8.1.3
Call from the phonebook
Press
to access the phonebook and press
desired phonebook entry.
to delete digits.
to connect
key.
/
to select the