Turning The Unit's Power On And Off; Checking The Video Output; Displaying The Osd Menus On A Pc Monitor - Panasonic AW-HS50E Mode D'emploi

2. Preparations
2-3. Turning the unit's power on
and off
 Turning on the power 
1
Set the POWER switch to the ON position.
When power is supplied to the unit, the POWER
indicator lights up green.
 Turning off the power 
1
Set the POWER switch to the OFF
position.
The unit's power is turned off, and the POWER
indicator goes off.

2-4. Checking the video output

Described below are the steps taken to display the
unit's OSD menu on an external monitor to check the
unit's video output.
2-4-1. Displaying the OSD menus on a
PC monitor
1
Connect the PC monitor to the unit's
DVI OUT connector.
2
Turn on the power of the PC monitor.
3
Turn on the power of the unit.
4
Hold down the OSD ON button.
The OSD ON button indicator lights, and the OSD
menus are displayed on the PC monitor.
If the OSD menus do not appear on the monitor,
refer to "2-5-2. How to forcibly display the OSD
menus".
Note
If the OSD menu fails to appear on the PC monitor
even after the above steps have been taken, it may
mean that the PC monitor does not support the
unit's DVI output format.
Check the input specifications of the PC monitor.
22 (E)