Preparations; Installation Precautions - Panasonic AW-HS50E Mode D'emploi

2. Preparations

2-1. Installation precautions

 In addition to heeding the points presented in the "Safety precautions", 
observe the following precautions as well.
Be absolutely sure to ask your dealer to do the jobs of installing and connecting the unit.
Connecting the power supply
  Be absolutely sure to use only the power cable and
AC adapter supplied with the unit.
  The power cable supplied with the unit has a 3-pin
plug with a grounding terminal.
Connect it to a 3-pole outlet which has been
connected to ground.
  Be absolutely sure to connect the ground terminal
(SIGNAL GND) at the rear of the unit to the system
ground.
  Insert the DC plug as far as it will go until it locks
into position.
  When the unit is not going to be used for a
prolonged period of time, turn off its power, and
disconnect the power plug from the AC outlet.
4
3
2
ON
1
SD I IN
1
2
3
B O O T
M
S V N
POW ER
IN
12 V
Handle carefully!
  Dropping the unit or subjecting it to strong impact or
vibration may cause trouble and/or malfunctioning.
Do not allow any foreign objects to enter
inside the unit!
  Allowing water, metal items, scraps of food or other
foreign objects inside the unit may cause a fire and/
or electric shocks.
Choosing the best installation location
  This unit is designed for indoor use only.
  Install the unit on a sufficiently strong, stable and
level surface for use.
  Ensure a space of at least 100 mm around the front
and rear vents to avoid obstructing ventilation.
In particular, ensure sufficient space between
ventilation and wiring when using mounted in a
panel or table.
  Do not install the unit in a manner in which its
cables and other accessories can be easily
damaged.
  Do not install the unit in a cold place where the
temperatures will drop below 0 °C or in a hot place
where the temperatures will rise above +40 °C.
  Avoid installing the unit where it will be exposed to
direct sunlight or to the hot air that is blown out from
other products.
  Installing the unit in a very humid, dusty or
vibration-prone location may give rise to trouble.
18 (E)
Ventilation holes