Precision TA500 Manuel D'utilisation page 9

8. Attach the Handle Grip to the Handle. Insert the 5/16" x 1-3/4" Hex Head Bolt in to the top hole in the Handle
(from the right side as us are facing the unit), then through the top hole of the Lever Link and secure with a 5/16"
Nylock Nut. Attach the 5/16" Nylock Jam Nut to the 5/16" x 2-1/4" Hex Head Bolt (leaving about 1/2" spacing
at the top). Insert the bolt into the second hole of the Handle (from the right as you are facing the unit), and the
Lever Link, then secure with a 5/16" Hex Head Nut. See Figure 8.
Lever Link
Lever Link
5/16" Nylock Nut
5/16" Nylock Nut
Figure 8
Figure 8
5/16" Jam Nylock Nut
5/16" Jam Nylock Nut
Handle Grip
Handle Grip
Handle
Handle
5/16" x 1-3/4"
5/16" x 1-3/4"
Hex Head Bolt
Hex Head Bolt
5/16" x 2_1/4"
5/16" x 2_1/4"
Hex Head Bolt
Hex Head Bolt
9