Precision TA500 Manuel D'utilisation page 6

4. Place a 1" x 1/2" Spacer onto the Axle, followed by a Wheel Bracket. Align the hole of the Wheel Bracket with
the hole in the Axle. Insert a 5/16" x 1-1/2" Hex Head Bolt into the hole in the Wheel Bracket and Axle. Secure
with a 5/16" Nylock Nut. Repeat process on the other side. See Figure 4.
Figure 4
Figure 4
5. Place a 1/2" Flat Washer onto a 1/2" x 3" Hex Head Bolt, followed by a Wheel and then another 1/2" Flat
Washer and secure with a 1/2" Nylock Nut (Do not over tighten or the Wheel will not turn). Insert this assembly
into the hole in the Wheel Bracket, then place a 1/2" Lock Washer onto the bolt and secure with a 1/2" Jam Nut.
Repeat process on the other side. See Figure 5.
Figure 5
Figure 5
5/16" x 1-1/2" Hex Head Bolt
5/16" x 1-1/2" Hex Head Bolt
1/2" Jam Nut
1/2" Jam Nut
Wheel Bracket
Wheel Bracket
5/16" Nylock Nut
5/16" Nylock Nut
1" x 1/2" Spacer
1" x 1/2" Spacer
Axle
Axle
1/2" Nylock Nut
1/2" Nylock Nut
6
1/2" Flat Washer
1/2" Flat Washer
1/2" x 3" Hex
1/2" x 3" Hex
Head Bolt
Head Bolt
Wheel
Wheel
Wheel Bracket
Wheel Bracket
1/2" Lock Washer
1/2" Lock Washer