Table des Matières
Publicité
1-1. Servicing Motor Brushes
7-3.
Servicing Motor Brushes
2
rubbergloves
weldgloves
allen_set
glasses
knife
oilcan
filtersocket
1
earmuffs
ear plugs
3
tools/
flathead
philips head
hairdryer
cclamp
steelbrush
hacksaw
2
tools/
electrodewrench
252806-B
wrench
crescent wrench
rpmmeter
benchvise
nutdriver
chippinghammer
belttensiongauge
1
Motor Brushes
2
Sight Windows
3
Motor Brush Release Tabs
Carbon brushes in the motor will
Turn off power and disconnect in-
wear. The expected life is approxi-
put power cord.
mately 600 working hours. We rec-
ommend replacing the carbon brush-
�
Unit is shown with top cover removed.
es regularly to ensure proper opera-
tion of the unit, or when the end of
1 Motor Brushes
either brush is visible in the sight win-
dow.
2 Sight Windows
Replace carbon brushes as follows:
3 Motor Brush Release Tabs
Disconnect input power
Carbon brushes in the motor will wear. The
Remove top cover
expected life is approximately 600 working
Remove black wires from brush
hours. We recommend replacing the carbon
holders
brushes regularly to ensure proper operation
of the unit, or when the end of either brush is
Depress release tabs, and slide
visible in the sight window.
brush/holder out
Insert new brush/holder, and slide
Replace carbon brushes as follows:
in until it locks in place
� Disconnect input power
Reinstall top cover.
� Remove top cover
� Remove black wires from brush holders
� Depress release tabs, and slide brush/
holder out
� Insert new brush/holder, and slide in un-
til it locks in place
� Reinstall top cover.
helmet
weldshield
popriveter
OM-244785 Page 1
sealant_1
OM-244785 Page 23
faceshield
tape
Publicité
Table des Matières
