Table des Matières
Publicité
4-1.
General Description
The Filtair High Vac 130 weld fume collector is a mobile, high-vacuum/low volume system that uses a high efficiency cartridge filter to collect air-
borne weld fume particles. Weld fumes are captured at the source by a hose-mounted nozzle and directed through the filter where the particles
are removed from the air. Compressed air is used to remove particles from the outside of the filter. The particles drop into a collection tray where
they are collected for disposal. The weld fume collector comes fully assembled and includes collection hose, casters, and input power cord. A va-
riety of collection nozzles is also available.
1
2
245 353-F
4-2.
Fume Extractor Specifications
Length Of In-
Input Power
put Power
Cord
115 Volts AC
20 ft (6 m)
11 A, 60 Hz
4-3.
Environmental Specifications
A. Temperature Specifications
Operating Temperature Range
—22 to 122°F (-30 to 50°C)
OM-244785 Page 16
SECTION 4 – SPECIFICATIONS
5
4
Nominal Air
Flow
Motor
(Variable)
0–132 CFM
(0–62 liter/
1.27 kW
sec)
6
1 Handle
2 Clean Air Outlet
3 Input Power Cord
4 Locking Clasp
5 Particle Collection Tray
7
6 Caster With Brake
7 Connection Port
8 Collection Hose
9 Power Switch With Circuit Breaker
10 Filter Monitoring Light
11 Air Flow Control With Guard
12 Nozzle (Optional) — Not Shown
Sound
Filter Area
Level At 5
ft (1.5 m)
31ft
2
(2.898
68.5 dBa
m
2
)
Storage/Transportation Temperature Range
-40 to 149°F (-40 to 65°C)
Protection
Hose
Weight
Length
8 ft (2.4 m)
46 lb (17 kg)
Dimen-
sions
12 x 14 x
27 in. (305
x 356 x
686 mm)
Publicité
Table des Matières
