Publicité
Les langues disponibles
Les langues disponibles
Drive Belt 512-712: Replacing
•
Rotate the cowling.
•
Remove the belt (ref. 1) from the groove of the pulleys.
•
Fit the new belt (ref. 1) onto the pulleys.
Regular Maintenance
Daily Operations
1.
Empty the bins.
2.
Make sure there are no wires or straps rolled around the center brush.
3.
Recharge the batteries according to the procedure described.
Weekly Operations
1.
Check for wear of the FLAPS. If necessary, replace.
2.
Check the condition of the suction air filter and make sure it is undamaged. If necessary, replace.
3.
Check the level of battery electrolyte and top up with distilled water if necessary.
Semi-Annual Operations
•
Have the electricity circuit checked by qualified personnel.
Table Of Maintenance
•
A : On receipt
•
B : Every 10 hours
•
C : Every 50 hours
•
D : Every 100 hours
CHECK
Center brush: make sure there are no straps or nylon cord
wrapped around the brush. If necessary, remove.
Center brush: check wear of the brush
Side brushes: check wear of the brushes
14
A
B
C
D
Publicité
