Introduction; Explanation Of Symbols - Renkforce EL603 Mode D'emploi

1. Introduction

Dear Customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact:
International:
United Kingdom:

2. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric shock.
The exclamation mark in a triangle indicates important notes in these operating instructions that must be
observed strictly.
The "arrow" symbol indicates that special advice and notes on operation are provided.
This symbol on the device indicates that the user must read these operating instructions before using the
product and observe them during operation.
This symbol warns of hot surfaces the contact with which may cause injury.
This symbol indicates that the mains connection must only be made to an earthed mains socket.
This symbol notes that the emitted LED radiation may be dangerous to the eyes. Never look directly into
the LED beams.
20
www.conrad.com/contact
www.conrad-electronic.co.uk/contact