Dustcontrol DC Tromb Turbo Traduction Des Instructions De Service D'origine page 19

Masquer les pouces Voir aussi pour DC Tromb Turbo:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
DC Tromb Turbo is used for spot extraction (with maximum throttling Ø 15 mm) in diverse tasks, such as when grinding, welding,
personal clean-up and cleaning. DC Tromb Turbo is powered by a 3-phase turbo pump.
Discharge options
The dust extractor has the following discharge options:
c – Plastic bag: The extracted and separated material is collected in a plastic bag that can be detached in one simple operation.
The material can easily be recycled or disposed of.
a - Container: A cylindrical container for collection of separated material.
L – Longopac: The machine is equipped with a flexible bag system, in which the dust is collected in a closed system.
Lifting the machine
1. When lifting the machine, there is a risk of personal injury and damage to the machine or environment.
2. Always define the risk area when lifting.
3. The machine's cyclone, the discharge system and filter must be emptied and cleaned before lifting.*
4. Lifting slings (color code purple or higher and with a lifting hook according to standard Class 8 or Class 10) are recommended
for lifting the machine.
5. The two lifting slings are joined with a lifting hook (A). Position of the lifting slings as shown in the image below (B) and tighten
out the slings after securing them.
DC Tromb Turbo, 99049-A
19

Publicité

Table des Matières
loading

Table des Matières