Safety Instructions For Further Risks; Environmental Protection; Information For Users; Symbols - Fox F36-090 Notice D'utilisation

SAFETY INSTRUCTIONS FOR
FURTHER RISKS
- Do not force the machine unnecessarily: excessive
cutting pressure may lead to rapid deterioration of the
blade and a decrease in performance in terms of fi nish
and cutting precision.
- When cutting aluminium and plastics always use the
appropriate clamps: all workpieces must be clamped
down fi rmly.
- Avoid accidental starts: do not press the start button
while inserting the plug into the socket.
- Always use the tools recommended in this manual to
obtain the best results from your cutting-off machine.
- Always keep hands away from the work area when the
machine is running; before performing tasks of any kind
release the main switch button located on the handgrip,
thus disconnecting the machine.
- Ensure the locking pin no.16 (Fig.2) is inserted
completely when the machine is used as a circular
saw.
Working with an electric machine can be dangerous if you
do not follow suitable safety measures. As for any electric
machine with moving parts, the use of a tool entails some
risks. If you use the machine as prescribed in this manual,
you pay careful attention to the work you are doing, you
observe the regulations and you use the suitable personal
devices of protection, you can reduce the probability of risk.
The possible further risks are related to:
1 direct or in direct contacts with electrical shock
2 injuries due to contact with moving or rotating parts,
and especially mitre saw's teeth
3 injuries due to contact with angular or cutting parts
when replacing the blade
4 injuries due to the ejection of tool parts or of the material
you are processing
5 injuries due to noise while cutting
6 injuries due to inhalation of dangerous dust
7 injuries due to the fact that the tool has been not
correctly assembled
14

ENVIRONMENTAL PROTECTION

INFORMATION FOR USERS

In accordance with art. 13 of Legislative Decree
25th July 2005, no. 151 "Implementation
of Directives 2002/95/EC, 2002/96/EC and
2003/108/EC, relative to reducing the use
of hazardous substances in electric and electronic
appliances and the disposal of waste", please take note
of the following:
• The crossed out wheelie bin symbol found on the
appliance or the packaging indicates that the product
must be disposed separately from ordinary household
waste when it reaches the end of its working life.
• The user must consign the unwanted appliance to
an authorised waste disposal centre for electric and
electronic goods, or alternatively, hand it over to the
relative dealer at the moment of purchasing a new
appliance of the same type on a basis of a one to one
ratio.
• Differentiated disposal to enable possible recycling
or environmentally compatible elimination of the
appliance, helps to limit undesirable effects on
health and environment and promotes the reuse
and/or recycling of the materials that compose the
appliance.
WARNING!
In accordance with the relative legislation in
force in the country of use, sanctions will be
imposed on the user if the appliance is disposed
of illegally.

SYMBOLS

Always wear protective goggles to avoid any
spurts during the use of the machine.
Read and understand the instruction manual
before use.
Always wear a dust mask if the operation
produces dust.
Always wear ear protective devices which
protect you from noise while using the
machine.
Product in compliance with relative CE
regulations.
Double insulation. This symbol means that
you cannot get at any element carrying
the electrical current without using a tool.
Tools which have this symbol do not have
any earthing protection systems.