Audio-Technica 3000 Serie Installation Et Utilisation page 9

UniPak Transmitter Functions
Function Menu
(Transmitter powers-up at Frequency)
▲▼
Frequency
▲▼
RF Power
▲▼
Audio Input Level
▲▼
Power/Mute Locks
▲▼
Input Select
▲▼
Reset to Defaults
▲▼
Quit (exit Menu)
** Continue in the same Up/Down direction and choices "wrap around" to the other end of the range.
† Band F 840.125 - 864.875; Band E 795.500 - 820.000.
If accessing de-regulated band 863.125 - 864.875 MHz then RF power should be assigned to "RF Low".
Some EU countries may restrict both handheld and bodyworn RF devices to RF Low. Typically handheld devices should be assigned "RF Low" and bodypack devices either "RF
High or Low". If in doubt please check with your dealer or local RF authority.
Table 2. UniPak Transmitter Functions
Handheld Transmitter Functions
Function Menu
(Transmitter powers-up at Frequency)
▲▼
Frequency
▲▼
Audio Input Level
▲▼
Power/Mute Locks
▲▼
Reset to Defaults
▲▼
Quit (exit Menu)
** Continue in the same Up/Down direction and choices "wrap around" to the other end of the range.
† Band F 840.125 - 864.875; Band E 795.500 - 820.000.
Table 3. Handheld Transmitter Functions
See illustration figures
Choices (Edit) ▲▼
Default Setting
Lowest in band† 198 discrete frequencies F band. 197 E band
RF LOW RF LOW
+6 dB –6 dB
NO.LOC NO.LOC
MIC MIC
PRESET LOAD
QUIT Press Set to exit
Default Setting Choices (Edit)
Lowest in band† 198 discrete frequencies F band. 197 E band
+6 dB –6 dB
NO.LOC NO.LOC
PRESET LOAD
QUIT Press Set to exit
RF HI
0 dB +6 dB +12 dB
ALL.LOC MUT.LOC PWR.LOC
INSTR
(b) hold until: DEF (c) hold until: LOADED
▲▼
0 dB +6 dB +12 dB
ALL.LOC MUT.LOC PWR.LOC
(b) hold until: DEF (c) hold until: LOADED
9
Wrap-around**
Yes
Yes
No
Yes
Yes
--
--
**
Wrap-around
Yes
No
Yes
--
--
E
N