Sonnenkonig AROSA Notice D'utilisation page 82

between 1 and 8 hours. The control panel will state the set number of hours (12) and count
down. After the set time has elapsed, the appliance automatically switches off.
6. Light button for activating backlight (14)
• By pressing the "light" button, you can switch the control panel backlight on and off.
GB
7. Activating child safety mode (13 + 14)
• Simultaneously touching both the "timer" (13) and the "light" (14) button for 3 seconds will
activate child safety mode. Now, no further changes can be made to the appliance settings
and the buttons will no longer react to being touched. The display will indicate that the child
safety mode is switched on (11).
• If you wish to deactivate child safety mode, touch the buttons "timer" and "light" again for
3 seconds and the display for child safety mode (11) will go out.
The following displays illuminate even when you have not activated a function:
• "CURRENT HUMIDITY" display (4)
The "CURRENT HUMIDITY" display illuminates once the appliance has been activated with
the "power" button and displays the current degree of relative humidity in the room:
LOW: room humidity is low, below 40%
LOW e MID: room humidity is intermediate, between 40% and 60%
LOW, MID e HIGH: room humidity is high, above 60%
NOTE: The humidity switch built into the appliance measures humidity directly at the ap-
pliance. Another humidity switch, placed outside of the appliance, might show a different
humidity value.
• "WATER SHORTAGE" display (5)
Should the water level in the water basin fall below the minimum, the display "WATER
SHORTAGE" (5) will illuminate on the control panel and the appliance will automatically
switch off.
82