Fitting The Hose - Zodiac BARACUDA PACER Notice De Montage Et D'utilisation

2-Pacer ANG 0710.qxd 15/09/10
Figure 2
13:41 Page 5
1 2

2 / Fitting the hose

The hose for your Pacer is composed of 10x1 m sections.
Greatest
distance
•
Once you have calculated the total length, assemble the hose by
inserting the 1 m sections one into another.
•
A hose weight is supplied to be used to prevent the hose from
floating on the surface or if the Pacer tends to lift off the bottom
of the pool. Fit the hose weight approximately 1 m from the
cleaner (Figure 3)
the bottom of the pool when the robot is operating.
Figure 3
•
The ideal hose length for your pool corresponds
to one 1 m hose section plus the greatest distance
between the connection point (suction point
or skimmer) and the furthest point in your pool
(Figure 2).
Ex: if the greatest distance between the suction line
or skimmer and the furthest point equals 8 metres,
you will need 9 one-metre sections.
and ensure that the disc is perfectly flat on