Quick Network Setup - Eneo IPC-53M2812M0A Guide D'installation Rapide

Quick Network Setup

1. After the camera is connected to the network, start 'eneo Scan Device' tool (en-
closed CD).
2. Use the 'Scan eneo'
3. By default the camera is set to DHCP. If there is no DHCP server present in the net-
work the camera will fall back to a default IP address after a while. In this scenario
identical IP addresses.
The network camera's default IP address is: 192.168.1.10.
4. Right clicking the device name in the eneo Scan Device tool will bring up the
context menu. Use the 'Open Device Web Site' option to access the camera.
5. The web viewer login page will open up in your default web browser.
In case of Microsoft Internet Explorer install Active-X named VIDEOR E. Hartig
GmbH according to the instruction at the bottom of the browser.
6. Use the default user name and password to log in.
Default user name: admin
Default password: admin
8