2.5.3 Music Mode
Music/Bank Copy
Chase buttons 1-6
2.6 MIDI Operation
2.6.1 MIDI Channel Setting
MIDI/Rec
BANK
MIDI/Rec
1.
Tap the Music/Bank Copy button to activate Music mode.
A highlight in the Segment Display next to «Music trigger»
will indicate Music mode.
2.
Select your desired chase by tapping one of the
6 Chase buttons, the chase will be triggered by the music
beat. You may select several chases at a time.
1.
Press and hold down the MIDI/Rec button for 3 seconds,
the last two digits of the Segment Display will flash
to indicate MIDI channel setting is ready.
2.
Use the Bank Up/Down button to select the
DMX channel 01-16 to assign to MIDI channel.
3.
Press and hold down the MIDI/Rec button for 3 seconds
to store your setting and to deactivate MIDI setting.
If you wish to give up your setting, tap any other button
(except Bank Up/Down buttons) to exit MIDI mode.
Page 45