Add A Step - Ghost Mydmx Manuel

2.3.2

Add a Step

Step/time
Blackout Music trigger
Step
PROG
8888
Auto trigger
Chase Scene Bank
Tap Sync/Display
BANK
MIDI/Rec
Step/time
Music trigger
Blackout
Step
PROG
8888
Auto trigger
Chase Scene Bank
Tap Sync/Display
Hints:
You may tap the Tap Sync/Display button to change the display mode between step
and the bank.
MIDI/Rec
Page 40
1. Program enable.
2. Select the chase you wish to add a step to.
3. Tap the Tap Sync/Display button causing a dot next to
«Step» to light , the first digit in the Segment Display shows
the chase and the next three digits show its step.
4. Tap the Bank Up/Down button to scroll to the step you wish
to add a step after.
5. Tap the MIDI/Rec button, the Segment Display will read the
step one higher than before.
For example, if you want to insert a step between step 3
and step 4, and you scroll to step 3, when you tap the
MIDI/Rec button, the Segment Display will read step 4.
6. Tap the Tap Sync/Display button again, the Segment Display
shows the current chase, scene and bank.
Create a desired scene and record it as a new step or
select a programmed scene you wish to add into this
chase.
7. Tap the MIDI/Rec button again, all LEDs and the Segment
Display will flash three times briefly indicating the new step
has been inserted into this chase.