Running Scenes; Manual Mode; Auto Mode - Ghost Mydmx Manuel

2.4 Running Scenes

2.4.1 Manual Mode

SCENE

2.4.2 Auto Mode

This function allows you to run a bank of programmed scenes in a sequential loop.
Auto/Del
BANK
30S
0.1SEC
10MIN 0
SPEED FADE TIME
Page 42
1. When the power is turned on, this unit enters
Manual mode automatically.
2. Make sure Auto trigger and Music trigger indicators in the
Segment Display are both off.
3. Use the Bank Up/Down button to select the bank that
contains the scenes you wish to run.
4. Tap the Scene button to select the scene to run.
1. Tap the Auto/Del button to activate Auto mode.
A highlight next to «Auto trigger» will indicate
Auto mode is active.
2. Use the Bank Up/Down button to select
a bank of scenes to run.
3. After selecting the bank of scenes you wish to run, you can
use the Speed slider(or Tap Sync/ Display button) and
Fade Time slider to adjust the scenes to your desired effect.