Programming Chases; Programming A Bank Of Scenes Into A Chase - Ghost Mydmx Manuel

2.3

Programming Chases

You must program scenes before you can program chases, this function allows you to
store up to 240 scenes into one chase.
Chase Button 1-6
SCENE
MIDI/Rec
2.3.1 Programming a Bank of Scene into Chase
Music/Bank Copy
MIDI/Rec Copy
1. Program enable.
2. Tap the Chase button to select the chase to program.
3. Select a desired scene from the bank that has stored
scenes.(described in Programming Scenes)
4. Tap the MIDI/Rec button.
5. Repeat steps 3-4 until you've reached your desired effect.
You may record up to 240 scenes into a chase.
1. Program enable.
2. Select the chase using Chase buttons 1-6.
3. Use Bank Up/Down button to select the bank that contains
the scenes you wish to copy.
4. Tap the Music/Bank Copy button.
5. Tap the MIDI/Rec Copy button, all LEDs and the
Segment Display will flash three times briefly indicating all
8 scenes in this bank have been programmed into this
chase.
Page 39