Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.5 Running Chases
2.5.1 Manual Mode
BANK
2.5.2 Auto Mode
Auto/Del
Chase buttons 1-6
30S
0.1SEC
10MIN
0
SPEED FADE TIME
Page 44
1.
When the power is turned on, this unit enters Manual
mode automatically.
2.
Select your desired chase by tapping one of the six Chase
buttons. A second tap of this button will deactivate this function.
3.
Use the Fade Time slider to adjust the current scenes to
your desired effects.
4.
Use the Bank Up/Down button to scroll through the chase
to run all banks of scenes.
1.
Tap the Auto/Del button to activate Auto mode.
A highlight next to «Auto trigger» will indicate Auto mode.
2.
Select your desired chase by tapping one of the
6 Chase buttons. A second tap of this button will
deactivate this function.
3.
Use the Speed slider (or Tap/Sync) and Fade Time
slider to adjust the chase to your desired effects.
You may select several chases at a time, the chases will
run in sequence that you select the chases.
Publicité
Chapitres
Table des Matières
