Rear View - Ghost Mydmx Manuel

2. Scene Buttons
3. Segment Display
Bank Buttons
4.
(Up/Down)
Chase Buttons
5.
(1-6)
6.
Program Button
7. MIDI/Rec Button
8.
Auto/Del Button
9.
Music/Bank Copy
10. Blackout Button
11. Tap Sync/Display
12. Fade Time Slider
13. Speed Slider
14. Page Select Button
15. Faders
.
1.2

Rear View

1. MIDI IN
2. DMX Polarity Select
3.
DMX Out
4. DC Input
Press the scene buttons to load or stored your scenes. There
are a maximum of 240 programmable scenes.
Shows the current activity or programming state.
Press the Up/Down buttons to select a bank from 30 banks.
Used to select your programmed chase consisting a maximum
of 240 scenes
Used to activate Program mode.
Used to control MIDI operation or to record programs.
Used to activate Auto mode or to delete scenes and chases.
Used to activate Music mode or to create scenes and chase
programs.
Used to disable channel output.
Used to create a standard beat or to change the values display
between 0 and 255
Used to adjust the Fade Time. Fade Time is the amount of time
it takes for a fixture(scanner) to move from one position to ano-
ther, for the dimmer to fade in or fade out.
Used to adjust the speed at which the scenes will chase.
Used to select faders for the fixture between Page A (1-8) and
Page B (9-16).
These faders are used to control the intensity of channel 1-8 or
channel 9-16 depending upon the selected page.
Receives MIDI data.
Used to select DMX polarity.
This connector sends your DMX value to the DMX fixture or
DMX pack.
DC 9-12V, 300 mA min.
Page 31