EUFAB Bike Lift Manuel De L'opérateur page 41

WARNING
Travelling without safety belts can cause
accidents.
Injury to people or damage to property
due to loss of the bicycles.
 Before beginning each journey, check
that the belt around the bicycles and
the carrier U-bracket is sitting correctly
and securely, see step 12 in this
chapter.
 Before beginning each journey, check
that both belts around the front wheel
and the belt around the back wheel of
the bicycle are sitting correctly and
securely
 Retighten the belts if necessary.
 Before beginning each journey, check
that the belts used are undamaged
and unworn
 Replace damaged or worn belts with
undamaged belts before beginning the
journey. Use only belts that are
approved by EAL GmbH for the
purpose.
WARNING
A loose connection between the carrier
and the bicycle can cause the connection
to become detached and loss of the
bicycle.
Injury to people or damage to property
due to loss of a bicycle during the
journey.
 Check that the bicycles are fixed
securely and fully.
 If the connection is loose, repeat steps
1 to 12 from this chapter.
 Now raise the bicycle carrier as described in
the chapter on "Raising the Bicycle Carrier".
WARNING
An unraised or unsecured bicycle carrier
can become caught on obstacles.
Injury to people or damage to property
due to loss of the bicycle carrier during
the journey.
 Raise the bicycle carrier to the end
position before each journey.
 Ensure that you secure the bicycle
carrier with the locking pin, as
described under "Raising the Bicycle
Carrier".
GB
Attaching Bicycles
41