WARNING!
Use a pipe detector to detect electrical conduits and pipes in the wall before drilling the required
holes to prevent unnecessary damage to the wall or dangerous situations.
a.
Fit the installation plate
lation plate. See figure 8.
b.
If the wall is made of brick, concrete or the like, drill eight (8) 5mm diameter holes in the wall. Insert
clip anchor
c.
Fit the installation plate
G
REMARK
Mount the mounting plate and drill the holes in the wall corresponding to the material of the
wall and the mounting points on the mounting plate in question (dimensions are in "mm" unless
otherwise indicated).
S3425
S3425
90
SC3425
SC3425
40
133
4
52
52
horizontally on structural parts of the wall with spaces around the instal-
for appropriate mounting screws
on the wall with eight (8) type "A" screws
Correct orientation
of Installation Plate
Figure 8
70
70
750
920
.
50
.