Revell Control Technik NIGHT FLASH 24711 Mode D'emploi page 16

24711
Required batteries for the
helicopter:
Rated output: DC 3.7 V / 0.67 Wh
Batteries: 1 x 3.7 V rechargeable
LiPo battery (integrated)
Capacity: 180 mAh
Charger:
Power supply: DC 5 V of USB port of
a PC or USB hub
Rated output: 4.2 V / up to 500 mA
1 HELICOPTER
1A Counter­rotating rotor blades
1B Balance bar
1C Tail rotor
1D LED lamps
1E Charge socket
1F ON/OFF switch
3 INSERTING BATTERIES (REMOTE CONTROL)
Fernsteuerung
3A Unscrew and remove the cover
3B Insert 6 x 1.5 V AA batteries
and pay attention to the polarity,
as shown in the battery
compartment.
16
TECHNICAL DATA
Battery requirement for the
remote control:
Power supply:
DC 9 V
Batteries: 6 x 1.5 V "AA"
(not included)
2A ON/OFF switch
2B Thrust controller
2C Antenna
2D Trim adjustment
2E Controller for forwards and back­
wards flight as well as rotation
2F ON/OFF button for LED
2G Button for ‚Turbo' function
3C Close the battery cover and secure
with the screw.
HELICOPTER
NIGHTFLASH
2 REMOTE CONTROL