Inspection Before Measurement - Hioki CM4371 Mode D'emploi

Inspection Before Measurement

Inspection Before Measurement
Verify that the instrument operates normally to ensure that no damage occured during storage
or shipping. If you find any damage, contact your authorized Hioki distributor or reseller.
The battery cover is closed and its screw

has been securely tightened.
There is no foreign matter on the

measurement terminals. (p. 11)
The test leads are not broken.

Ω
1
OK
The battery voltage (p. 13) is sufficient.

14
or less
NO
Check item
There is no damage to the test lead

insulation, and neither the white sheathing
nor metal conductor inside the wire are
exposed.
The instrument is neither damaged nor

cracked.
No indicators are missing.

NO
(All lit up)
NO