Forch GO-5001 Mode D'emploi page 34

■
Disassemble the mouthpiece (1) of the device by using the wrench:
■
Disassemble the front socket (2):
■
Disassemble the clamping socket (3):
■
Take the 3-pcs. set of clamping jaws (4) out of the clamping socket (3) and take the as-
sembly pusher (5) and the pusher spring (6) out of the device and clean them all. In the
meantime check whether some parts are worn out or damaged and replace those by
new ones:
clamping socket
3-pcs. set of
clamping jaws
Assembly pusher
Mandrel bushing
Pusher spring