Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTION FOR
CUTTING
1. Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden wiring
or its own cord.Cutting accessory
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
2. Use clamps or another practical way
to secure and support the workpiece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
SYMBOLS
To reduce the risk of injury,
user must read instruction
manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
2.5A Oscillating Multi-Tool
Make sure the tool is
unplugged prior to changing
accessories.
Before working with your tool
make sure that no power cords
will be damaged.
Avoid danger of injury from the
sharp edges of the accessories.
Accessories can become very
hot while working, presenting
danger of burns!
Wear protective gloves
High oscillation frequency.
Low oscillation frequency.
Lock
Unlock
5
EN
Publicité
