Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Rescue-harness connection
Rescue bridles are sewn directly to the attachment points on the shoulder straps.
Before installing your rescue parachute in the container, connect the rescue bridle to
the harness bridle on the right side of the harness. The connection should be made
with a maillon rapide nipped tight with a spanner, or a suitable soft shackle.
Two types of maillon rapide can be used :
- Square stainless steel maillon rapide Peguet 7mm
- Oval stainless steel maillon rapide Peguet 6mm
44
9
Rescue container closure
Rescue parachute extractions have been tested on the G-force Trainer. The following
steps will guide you through the correct sequence to fit your rescue parachute into
the Suspender container. The reserve extraction is easier when the inner container
is placed with the lines on top, and this is recommended.
10
1
2
3
4
5
6
7
8
EN
45
Publicité
Table des Matières
