Package No; Pvc Panels - Front Wall; Pvc Panels - Rear Wall; Pvc Panels - 2 Panels - EINHELL Deluxe I Mode D'emploi

GB
DELUXE II (3 panels)
PVC panels

Package no.

Content
37.131.10

PVC panels - Front wall

37.131.11

PVC panels - Rear wall

37.131.13 PVC panels - 3 panels
DELUXE III (4 panels)
Aluminum profiles
PVC panels
Package no. Content
37.131.10 PVC panels - Front wall
37.131.11 PVC panels - Rear wall
37.131.12

PVC panels - 2 panels

37.131.12 PVC panels - 2 panels
Notes on the assembly instructions:
In the assembly instructions, the 4-panel model (2
panels + 2 panels / DELUXE III) serves as a
reference model. The overview diagrams all show
this model. The other greenhouses are only different
to this model in terms of the number of side panels (2
or 3 panels). If you have purchased one of the other
models, please refer to the relevant assembly
instructions for your equipment shed.
Assembly instructions
Please follow the assembly steps presented in the
German instructions.
These additional instructions contain all important
installation instructions and all important additional
information in your language. The examples below
show how the individual assembly steps and
illustrations are laid out in the German instructions.
Overview
The text in the right column contains an overview of
each assembly step. The parts required for the
assembly step are illustrated and circles mark the
sections with detailed drawings. In part these
symbols are also used for assembly previews and
overviews for checking the assembly work.
Parts list
At the beginning of each assembly step there is a list
of the parts used in this step. The list is divided into
six columns:
Article number, item, part drawing, description, size
or length, quantity required.
Use the printed article number, the part drawing and
the size/length to identify the required parts.
Assembly note
From assembly step 11 on, some steps must be
carried out several times.
4
Profile views
For ease of understanding the assembly the detail
drawings often include additional profile views.
Tools
The tools required for the assembly step are
illustrated here.
Repetitions of the assembly step
This field in the detail drawings shows the number of
repetitions, if required for the assembly.
Important note:
The following pages contain the assembly
instructions in your language. The page number of
the German instructions and the assembly step are
specified so it is easier for you to find your way
through the German instructions.
Assembly instructions:
PAGE 7
PVC panels / air inlets: Front wall and rear wall
The figure shows the external view
PAGE 8
PVC panels: Side / roof
The figure shows the external view
PAGE 9
Installation of the front wall assembly
1: Pre-assembly of the floor profile
Important note:
For ease of handling, the front and rear walls should
be assembled flat on the ground.
Bottom drawing: Assembly preview
Important note: At the cutouts marked with an X, no
angle brackets or gusset plates are fitted to the floor
profiles.
PAGE 10
1/a: Slide the guide rails of the two floor profiles each
into one connecting part up to the corresponding
cutouts (see Figure).
PAGE 11
1/c: Attach the floor gusset plate to the floor profile
using an additional bolt. Make sure that this bolt is
inserted on the left on the gusset plate mounted on
the left and on the right on the gusset plate mounted
on the right (see assembly preview details A and B).