Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
equipment shed. Only use approved heating
equipment.
Always make sure that you comply with the local
building regulations in your area.
Base / base diagram
Base
Important: The equipment shed does not have a
separate base profile.
You can erect your equipment shed on a previously
prepared brickwork or concrete base (see base
diagram).
Concrete / brickwork base
It is very important for correct assembly of the
equipment shed that the right angles in the base are
all perfectly square. The base must be dead level,
with perfectly square corners. Please use a spirit
level to check.
Important: The base should be deep enough to be
frostproof.
Important:
If you do not wish to place your equipment shed on a
brickwork or concrete base, ensure that you place
the equipment shed on a flat, firm surface. If
necessary, use a spirit level to check that it is level.
Base diagram
Concrete/brickwork 2 panels 3 panels 4 panels
Length (cm)
224
Outdoor (Länge)
Length (cm)
204
Indoor
Width (cm)
259
Outdoor (Breite)
Width (cm)
239
Indoor
Depth (cm)
10
(Tiefe)
Height (cm)
30
(Höhe)
Figure on page 5, bottom left
Outside
Concrete
or
Brickwork base
295
366
275
346
259
259
239
239
10
10
30
30
Note:
Ensure that there is sufficient space (s) between the
bore holes and the edge of the internal base.
Important:
The base must be at least 100 mm deep and 300
mm high.
The base must be dead level, with perfectly square
corners.
Packing lists - equipment shed
The aluminum profiles and PVC panels for your
equipment shed are shipped in several packages.
The carton "PVC panels - Front wall" also contains
two transparent web panels which can be fitted as
alternatives.
Aluminum profiles
Content
37.131.30
36.505.42
37.131.31
DELUXE II (3 panels)
Package no.
Content
37.131.30
Aluminum profiles - Front wall
36.505.42
Aluminum profiles - Rear wall
37.131.32
Aluminum profiles - 3 panels
DELUXE III (4 panels)
Aluminum profiles
Package no.
Content
37.131.30
Aluminum profiles - Front wall
36.505.42
Aluminum profiles - Rear wall
37.131.31
Aluminum profiles - 2 panels
37.131.31
Aluminum profiles - 2 panels
36.505.35
Set of connecting elements
DELUXE I (2 panels)
PVC panels
Content
37.131.10
37.131.11
37.131.12
GB
3
Publicité
Table des Matières
