EINHELL Deluxe I Mode D'emploi page 12

GB
Important note:
Once you have finished assembling the greenhouse,
check all nuts, bolts and screws to ensure that
they are all securely tightened. Tighten any that are
loose.
Note on replacement of the PVC / plastic web
panels:
To replace a PVC or plastic web panel, remove the
adjacent clip profiles as described below.
First, loosen the bolts on the aluminum profiles to
which the relevant clip profiles are attached. You can
then gently press the aluminum profiles outward,
which will allow you to easily pull out the clip profiles.
Then replace the panel and reassemble the
aluminum profiles and the clips exactly as described
in the instructions.
PAGE 122
Special accessories (not supplied)
36.405.90 Anchoring set BD4 (4 x ground anchors)
36.405.91 Anchoring set BD6 (6 x ground anchors)
Note:
The anchoring sets are used to secure the
equipment shed or the aluminium base in the
ground. Please refer to the overviews below for
information about the number of anchoring sets
required for your particular equipment shed. The
positions at which the individual ground anchors are
secured are marked with circles.
In order to fix the exact positions of the ground
anchors, position the equipment shed in its final
position. Then mark the positions where the ground
anchors will be installed.
Figure 2-panel shed, required anchoring sets, 2 x
BD4-set, 36.405.90
PAGE 123
Figure 3-panel shed, required anchoring sets, 2 x
BD4-set, 36.405.90
Figure 4-panel shed, required anchoring sets, 1 x
BD4 set, 36.405.90 and 1 x BD6 set, 36.405.91.
12