Télécharger Imprimer la page

Axis Q1604-E Guide D'installation page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
17 Wall bracket
18 Alternative cable hole
Cold Startup Delay Switch
The Cold Startup Delay switch, when turned on, controls how the camera restarts after a power cut,
when temperatures are below 0 °C (32 °F). The camera is first heated to approximately 0 °C (32 °F)
before it initializes. This prevents damage to camera parts sensitive to sub-zero temperatures.
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED
Green
Amber
Red
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
AXIS Q1604-E Network Camera
Indication
Steady green for normal operation.
Steady during startup and when restoring settings.
Flashes red for firmware upgrade failure.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
11

Publicité

loading