Bestway SALUSPA Manuel De L'utilisateur page 6

3. Affix the warning label.
To order the warning label, please contact your local Bestway After Sales Service.
IMPORTANT:
is smooth, flat, level and capable of supporting the weight for the entire time the
SaluSpa is installed (not on the carpet or other similar material). If the SaluSpa is
placed on a surface which does not meet these requirements, any damage caused
by improper support is not covered under the manufacturer's warranty. It is the
responsibility of the SaluSpa owner to assure the integrity of the surface at all times.
1. Indoor Installation:
Be aware of special requirements if you install the spa indoors.
• Humidity is a natural side effect with SaluSpa installation. First determine the
effects of moisture on exposed wood, paper, etc. in the proposed location. To
minimize these effects, it is best to provide plenty of ventilation to the selected
area. An architect can help determine if more ventilation is needed.
2. Outdoor Installation:
• During filling, draining or when in use, water may spill out of the spa. Therefore the
SaluSpa should be installed near a floor drain.
• Do not leave the spa surface exposed to direct sunlight for long periods of time.
SELECTED LOCATION
Due to the combined weight of the SaluSpa, water, and users, it is
extremely important that the surface where the SaluSpa is installed
6