KNOW YOUR PRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
L
M
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Spray Tips — Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
C - Accessory Tray — Provides convenient storage for
accessories, such as gun, spray tips, etc.
D - Recoil Starter — Used for starting the engine manually.
E - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
F - Cleaning Tank – Used to provide pressure washer safe
detergents into the low pressure stream.
G - Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
H - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
J - Air Filter — Protects engine by filtering dust and debris
out of intake air.
K - Water Inlet — Connection for garden hose.
L - Pump — Develops high pressure.
FEATURES AND CONTROLS
7
M - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
N - High Pressure Outlet — Connection for high pressure hose.
P - Oil Fill/Dipstick — Check, add and drain engine oil here.
R - Fold Down Handle — Handle and accessory tray fold flat
atop cold engine for space-saving storage.
S - Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.
T - Hose Wrap and High Pressure Hose — Hose wrap
provides easy transport and handling of the high pressure
hose. Connect one end of hose to water pump and the
other end to spray gun.
Items Not Shown:
Detergent Siphoning Tube/Filter — Use to siphon pressure
washer safe detergents into the low pressure stream.
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
T
S
R
P
N