Publicité
Les langues disponibles
Les langues disponibles
Continuous drainage
When unit is running in Dry mode, you can use the method below for continuous drainage.
Power off and unplug the unit from the power source.
1.
Remove the drain plug (Fig. 1). While doing this operation some residual water may spill so
2.
please have a pan to collect the water.
Connect a drain hose (Fig. 2). Note: Drain hose is not included.
3.
The water can be continuously drained through the hose into a floor drain or bucket.
4.
Turn on the unit.
5.
1.
(sensor malfunction)
(condensation reservoir full)
Drain
Cap
IF DISPLAYED
Low Temperature
(frost protection)
Probe Failure
Full Tank
2.
WHAT SHOULD I DO?
The appliance is fitted with a frost
protection device to avoid
excessive formation of ice.
The appliance starts up again
automatically when the defrosting
process is completed.
If this is displayed, contact
customer service
Empty the internal safety tank,
following the instructions
in the "End of season
operations" paragraph.
15
Garden hose or
drainage hose
Publicité
