Antari B-200 Mode D'emploi page 8

Occupation of the DIP-switches:
With optional BCT-1 timer remote control attached:
When the remote is connected, the B-200 can be controlled in two ways. The green
․
button on the remote is a manual override and the dial on the remote control sets the
timer function.
The B-200 will generate bubbles for as long as the green button is held down.
․
To enable the timer function, turn the dial clockwise. When the yellow light on the
․
remote turns on, the timer is on. The duration of bubbles is set at 10 seconds and is not
adjustable. The interval between bubble blasts is adjustable between 3 - 220 seconds.
To increase the interval, rotate the dial clockwise. To decrease the interval, rotate the
dial counter-clockwise.
With optional BCR-1 wireless remote control attached:
When the button on the wireless key chain transmitter is pressed, the B-200 bubble
․
machine will bubble continuously until the button is pressed again. The transmitter has
a range of up to 50 meters from the receiver.
Specification
- Input voltage
- Rated power
- Fluid consumption
- Fluid tank capacity
- Compatible fluid
- Operating time
- Ambient temp. range
- Control
- DMX Channels
- Connection
- Optional accessories
US model : AC 100-120V, 50 / 60Hz 0.85A
EU model : AC 220-240V, 50 / 60Hz 0.42A
100W
50 ml/min
2l (0.53gal)
Antari BL Bubble Fluid
40 mins at max. output
5 °C - 40 °C (41°F-104 °F)
DMX 512, Manual
Timer (Optional)
Wireless (Optional)
1 channel
IEC (Power)
XLR 5-pin (DMX)
BCT-1 Timer Remote
7