Amano American SANDERS 1600DC Mode D'emploi page 6

EN
The Sander 1600DC is a floor sanding machine. It can also be used for polishing, spraying, buffing and stripping. The machine can be used on wood, vinyl,
terrazzo or cement floors.
CAUTION:
Your equipment may be inappropriate on some installations. Some softer woods used in flooring cannot
support the pressure created by hard wheels. Always consult with the flooring manufacturer on the proper
installation, preparation, and finishing of their product. Determine suitability of your equipment in preparing
the product.
Introduction
The Sander 1600DC
Machine Specifications
Model
Code Number
Voltage (Volts)
Frequency (Hz)
Current (Amps)
Power (hp)
Pad Diameter
Pad Speed (rpm)
Cord Length (feet)
Weight (pounds)
Sander 1600DC
07101B
120
60
14
1.5
16.0
175
50
121
6