FAAC TM2 E Mode D'emploi page 17

DELETING INDIVIDUAL LIMIT STOP POSITIONS
Deleting the UPPER limit stop
Position the roller shutter/
screen in the upper limit
stop position and carry out
the sequence indicated:
Deleting the LOWER limit stop
Position the roller shutter/
screen in the lower limit
stop position and carry out
the sequence indicated:
DELETING ALL LIMIT STOP POSITIONS
Deleting limit stops from the UPPER limit stop position
Position the roller shutter/
screen in the upper limit
stop position and carry out
the sequence indicated:
Deleting limit stops from the LOWER limit stop position
Position the roller shutter/
screen in the lower limit
stop position and carry out
the sequence indicated:
After having deleted one or both limit stop positions, the motor moves with a delay
of 0.5 sec until both positions are memorised again in automatic or manual mode.
TM2 E
UP UP
DOWN DOWN
UP UP
DOWN DOWN
17
DOWN UP UP
UP DOWN DOWN
DOWN UP UP
UP DOWN DOWN
A4516_6J97_Rev.A
UP
DOWN
DOWN
UP