FAAC TM2 E Mode D'emploi page 16

MEMORISING LIMIT STOPS
MEMORISING THE POSITION OF THE UPPER LIMIT STOP
If the roller shutter is already completely rewound, you should first lower it by ap-
proximately 20 cm.
Bring the roller shutter to the required open position using the up buttons on
the control unit. To memorise the open position, follow the command sequence
indicated (UP-UP-UP).
UP UP UP
UP
MEMORISING THE POSITION OF THE LOWER LIMIT STOP
Bring the roller shutter to the required closed position using the down button on
the control unit. To memorise the closed position, follow the command sequence
indicated (DOWN-DOWN-DOWN).
DOWN DOWN DOWN
DOWN
MIXED MODE
The limit stop positions can be memorised in mixed mode, for example:
- Open limit Stop: automatic until it is fully open
- Closed limit Stop: manual with sequence from control unit
TM2 E 16 A4516_6J97_Rev.A