Télécharger Imprimer la page

Tristar OV-1417 Mode D'emploi page 5

Masquer les pouces Voir aussi pour OV-1417:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
BEFORE THE FIRST USE
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V 50Hz)
• Wash before using the device for the first time all loose parts in warm
soapy water. Rinse and dry thoroughly below. These parts are also
dishwasher safe.
• Always place the unit on a flat stable surface and ensure at least 30
cm. free space around the unit. This device is not suitable for outdoor
installation or use. Place the device on a safe place. Not too close to a
wall, the wall can burn or discolour. Please make sure that curtains or
something like that, not make contact with the device. Put nothing
between the bottom of the device and the surface on which you place
the device in order to prevent this will burn.
• Food, like bread, pizza and meat which is baked too long in the oven
can burn; this can be prevented by checking the food in the oven
regularly and not to stay too long in an enabled oven. Never heat food
in jars or cans directly in the oven, the heat could explode and cause
injury. Always use oven-proof bowls and plates.
• The oven may at first use spread some smell and smoke, this is normal,
so use the device in a well ventilated area.
Caution! The exterior of the device is heated also. Avoid any physical
contact, you can seriously injure. Always use the handle to the glass door
to open the oven.
USE OF ACCESSORIES
• Use the grid to prepare dry foods such as bread and pizza.
• The baking tray is suitable for cooking food which fat is released, such
as meat and chicken dishes. The baking tray can also be placed under
the grid to absorb any release of fat.
USE
• Using the temperature control knob the desired temperature setting
according to prepare the dish. Using the control knob heating position in
the desired heating mode, the next page you will see the explanation of
the various settings. Set the time setting control knob on 10 minutes and
preheat the oven, the red indicator light and the indicator goes out again
when the device had reached the setting time. The device is ready for use.
Heating position control button
OFF
Switch off the oven.
The top heating element is switched on.
Only the lower heating element is switched on.
Both, the top and lower heating element are switched on.
• Place the grid, the baking tray or both in the oven. These can be placed
at three positions. On the inside of the oven are three conductors.
• Use the temperature control knob to set the desired temperature, for
the time setting use the time control knob, depending on the dish to
prepare. Select the desired heating position by switching the heating
position button.The maximum time setting is 60 minutes, the minimum
time setting is 2 minutes.
Oven
EN
5

Publicité

loading