Inputs Of The Ls150 - Lenz Digital plus LS150 Manuel

20

Inputs of the LS150

The LS150 is supplied with power via the AC input (). Use a suitable transformer
– we recommend the Digital plus by Lenz
AC voltage must be used for the power supply. Do not use a DC
supply; this can damage the LS150.
The power of the transformer used must not exceed 45VA in order to
guarantee a functioning load protection.
Under no circumstances must the transformers TR150 and TR200 be
used !
The track output of the digital system (J,K for Digital plus by Lenz
must not be used to supply the LS150 with power!
The LS150 receives the switch information from the track format of the digital
system via the inputs J and K.
®
transformer TR100 (art. no. 26000).
®
)