Important Advice, Please Read First; Use Of The Ls150 - Lenz Digital plus LS150 Manuel

17

Important advice, please read first!

®
The LS150 is a component of the Digital plus by Lenz system and was submitted
E
to intensive testing before delivery. Lenz Elektronik GmbH guarantees fault-free
operation provided you follow the advice given below:
Any use other than that described in this operating manual is not permitted and all
guarantees will become invalid if the LS150 is used inappropriately.
Connect the LS150 only to devices which are designated for such connection.
This operating manual will inform you which devices are suitable.
Observe the technical data contained in this operating manual. Do not in any case
exceed the values stated for voltage and power as this could damage the LS150.
Do not expose the LS150 to damp or direct sunlight.

Use of the LS150

The LS150 is a switch decoder for use in connection with the
®
Digital plus by Lenz or any other NMRA-compliant system.
Switch decoders are the connecting link between the digital system and the
switchgear (for example points, relays, decouplers etc.) on your model railway
layout. Sometimes the term "magnetic article" is used for switchgear.
The LS150 was designed specifically for the connection of double-coil point drives
and relays. Here, the AC output of the LS150 is particularly advantageous:
double-coil drives switch very reliably.
Motorised point drives can also be connected to the LS150; this connection
requires (depending on the drive used) an additional 2 simple diodes.