Toto TBN01001U Manuel D'installation Et D'utilisation page 5

II. Installation of the MINI UNIT
1. Connect supply lines.
2. Secure MINI UNIT on the wall with
screws(not provided). Use anchor if
necessary.
3. Verify that the finished wall surface
is within the min-max range on the
plaster guard.
4. Use a level to keep product horizon-
tal and vertical from top to bottom
and from left to right. The level
gauge should be flushed to the
resin edge of MINI UNIT.
WARNING:
●Use pipe support, etc. to
secure sufficiently the HOT
and COLD water pipes and
any other related ducts to
avoid unnecessary
vibrations.
●The MINI UNIT can
connect with showers and tub
filler. When only installing the
tub filler, please connect to
Outlet #1.
INSTALLATION PROCEDURE
3-7/8"(98)
Outlet 2
Φ3/8"(Φ10)
Φ1/4"(Φ5.5)
Outlet 1
Level gauge
Convex
part of
resin edge
5
MINI UNIT
Horizontal
MINI UNIT