Teesa TSA2011 Manuel D'utilisation page 25

Owner's manual
• Do not run it over metal objects (such as against the ironing board, buttons, zips, etc.), as
it may damage iron's surface. Iron around any such object.
1. Before cleaning, disconnect the appliance from the mains.
2. Use soft cloth to clean the iron. Do not use solvents or abrasive products as it may
damage this device.
3. Before cleaning, firstly disconnect the device from power mains and let the appliance
cool down completely.
4. Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive
(liquid) cleaner.
5. DO NOT use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
6. Clean the iron with a soft damp cloth.
7. When not using the appliance for a long time, pour out the water in the tank, and store
the iron vertically, on a stable surface.
8. Wind the power cord around the base.
1. Before initiating this function, disconnect iron from the power supply;
2. Fill the water tank to MAX level.
WARNING: Do not fill the tank with other liquids than distilled water. Do not fill the water
tank with vinegar or any cleaning liquids!
3. Next, connect the iron to power supply, turn off steam function and turn temperature
knob to maximum position;
4. Hold the device horizontally above the sink;
5. Repeatedly press self-clean button. You can also gently shake the iron. Water will start to
pour out of the iron soleplate.
6. When all water inside water tank has been used, unplug the steam iron from the power
supply socket and leave the iron to cool off.
7. When the iron is cool, treat the soleplate with clean, damp cloth to remove any remaining
impurities and calc flakes.
It is advised to perform the self clean regularly in order to keep the device in optimum state.
Iron emits an odor
or smoke
CLEANING AND MAINTENANCE
Self-cleaning function
TROUBLESHOOTING
Iron gives off an odor when turned on for the first time. Oils used
during manufacture need to be burnt off. The odor will disappear
after a while.
25
EN