Blumfeldt Matera Mode D'emploi page 16

EN
16
CLEANING AND CARE
CAUTION
Danger of burns! Allow the fi replace to cool completely before
inspecting or cleaning it for damage.
Inspect the fi replace for damage
Check the fi replace regularly for damage to ensure product safety and a longer
service life.
1. Check all parts to make sure they are tight.
2. Check the components for damage.
3. If you fi nd damage to a component, have the fi replace repaired before
continuing to use it.
4. Remove loose paint and rust from the metal with a wire brush when
needed and re-paint using a high temperature paint, resistant to at least
600 °C. To help reduce surface rust, rub this product with an oily rag after
each use.
Cleaning
• Make sure that the fi re is completely extinguished when you no longer use
the fi replace.
• Make sure the fi re is completely extinguished and the fi replace has cooled
down before removing the ashes.
• Use a damp cotton cloth to remove soot. Clean the fi replace regularly to
ensure a long service life.
Note: The surface may discolour after repeated use.
• Do not use oven cleaner or scouring agents, as these can damage the
product.
• Clean the outside with water and a mild dishwashing liquid.
• For stubborn stains, use a citrus-based cleaner and a nylon brush.