Bose Professional EdgeMax EM90 Notice D'installation page 8

Installation
Installing in Hard Ceiling Using a Rough-in Pan (New Construction)
For information on installing a rough-in pan, see the EdgeMax Rough-in Pan installation guide at PRO.BOSE.COM. Once
the rough-in pan is installed, see Mounting the Loudspeaker on page 7.
Attaching the Grille
Insert the safety lanyard pin into the hole in the loudspeaker. Using both hands, position the grille against the loudspeaker.
The grille secures to the loudspeaker magnetically.
Safety and Regulatory Compliance
The Bose EdgeMax EM90 and EM180 loudspeakers have passed testing and comply with the following specifications and
uses:
Listed to ANSI/UL 1480A-2016, Speakers for Commercial & Safety Professional Use
General-Purpose Use - UL Category UEAY, File Number S 5591 Control Number 3N89
Suitable for use indoors in damp locations under UL 1480A, but see warnings and cautions on page 2 of this
installation guide for important installation restrictions.
UL-2043, 2013, Fire Test and Visible Smoke Release for Discrete Products and their Accessories Installed in Air
Handling Spaces. Suitable for use in air handling (plenum) spaces.
Suitable for installation using Class 1, Class 2, or Class 3 wiring methods in accordance with NFPA 70, National
Electric Code, 2017, Article 640
NFPA 70, National Electric Code, 2017, Article 300-22(c).
NFPA 90-A, 2015, Installation of Air Conditioning and Ventilation Systems, Paragraph 4.3.11.2.6.5
The EdgeMax EM90 and EM180 loudspeakers have been designed to the requirements defined in the following European
regulatory specification for combination systems:
Tested to IEC 60268-5, 2007
Wire Gauge
The EdgeMax EM90 and EM180 loudspeakers are designed to work with 18 AWG (0.8 mm2) to 14 AWG (2.5 mm2) size wire
only.
8 • English
PRO.BOSE.COM
EdgeMax EM90/EM180 • Installation Guide