Watts tekmar 519 Guide D'installation Rapide page 4

Les langues disponibles

Display

Installer settings. Press the

Room

MAX

For a full list of settings and operational details, please refer to the

thermostat Installation and Operation Manual 519_D that is available from

tekmarControls.com

519 _ Q - 06/16

Setting

and

AUXILIARY SENSOR

Select the type of auxiliary sensor. Available when an auxiliary

sensor is automatically detected. NONE = no auxiliary sensor,

ROOM = Indoor Sensor, OUT = Outdoor Sensor, FLOR = Slab

Sensor

ROOM SENSOR

Select if the built-in room temperature sensor is on or off. The

built-in room sensor can only be disabled when an auxiliary room

or slab sensor is connected.

FLOOR MAXIMUM

Set the floor maximum temperature in order to protect the floor

covering. Suggested settings: Tile = 90°F (32°C), Wood Floor =

85°F (29°C)

SET AWAY

Set the away temperature.

ESCAPE

Release the

and

buttons together for 5 more seconds.

buttons to return to the home screen.

All specifications are subject to change without notice.

Tel: (250) 545-7749 • Fax: (250) 984-0815

4 of 12

tekmarControls.com