Troubleshooting - Sonnenkonig OHIO Mode D'emploi

07 - TROUBLESHOOTING

PROBLEM
Indicator lamp for power
supply does not work
Indicator lamp for function
does not work
Infrared heater does not heat
up
Smell from sauna
Light bulb does not work
POSSIBLE REASON
The connector is not connected
correctly
No voltage supply connected
The heating control lamp is
defective
The circuit board or components
are defective
The heater is defective
The wire connection or the wire of
the heater is loose
The temperature sensor is de-
fective
The relay circuit board is not
working
Problems with the circuit
The light bulb is burned out
The wiring of the light bulb has
come loose
The electronic transformer is
defective
Problem mit der elektrischen
Schalttafel
SOLUTION
Check the plug or replace it
Check the power supply
Replace the corresponding control
panel
Replace the printed circuit board
Replace it with a new one.
With the same specifications
Check it and make it tight
Check if the connection of the tempe-
rature sensor is loose and replace it
Replace the circuit board.
Heater temperature is too high, dis-
connect the power and replace it.
Parts on the circuit are broken -
replace it
Replace the light bulb
Ersetzen Sie die Lampenfassung
EN
53