Lindy Vga Converter Plus Main Unit Button Functions - Lindy 32561 Manuel

LINDY VGA Converter Plus Main Unit Button Functions

Button
F key 'Function key'
ZOOM
HORIZONTAL/
VERTICAL SIZE
SHARP
BRIGHT
Direction Keys
Freeze/Hold-Reset
Page 8
Description of Function
Scans through the possible options to select. Each time the F key is pressed the LED
display cycles through the options listed below
Press '+' Zooms in the display on the TV
Press '-' Zooms out to normal display on the TV
Press '+' Increases display size
Press '-' Decreases display size
Press '+' Enables flicker reduction
Press '-' Disables flicker reduction
Press '+' Increase brightnes
Press '-' Decrease brightness
→
Moves the display right
←
Moves the display left
↑
Moves the display up
↓
Moves the display down
Press & Freezes the display on the TV and turns on the freeze LED. Once this LED is on
release pressing the button again unfreezes the display and turns off the freeze LED.
When the freeze LED is off, pressing and holding this button for several seconds
Press & resets the VGA Converter Plus. When the reset has been performed all the
Hold LEDs on the unit flash (except the SCART LED) and upon releasing the button
the LINDY VGA Converter Plus is reset.
Installation & Use English – English Guide
Picture
© LINDY ELECTRONICS LTD