Preliminary Checks; During Use; Transport, Storage And Handling - Corghi HD 1300 Manuel D'utilisation

PRELIMINARY CHECKS

Before starting to work, carefully check that all machine components, particularly rub-
ber or plastic parts, are in place, in good condition and operate correctly. If damage or
excessive wear is found during the inspection phase, replace or repair the component
immediately regardless of the amount of damage or wear.

DURING USE

If strange or unusual noises are heard, if a component or system is not operating correctly
or if you observe anything unusual, immediately stop using the machine.
• Identify the cause and implement all the necessary corrective measures.
• Contact your supervisor if necessary.
Make sure that all other people are positioned at least 6 metres (20 feet) from the machine.
To stop the machine under emergency conditions:
• disconnect the power supply plug;
Each machine has a data plate Fig. 1, with information about the machine and some
technical data.
As well as the manufacturer's details, it
indicates:
Mod. - Machine model;
V - power supply voltage in Volts;
A - Input voltage in Amperes;
kW - Absorbed power in kW;
Hz - Frequency in Hz;
Ph - Number of phases;
bar - Operating pressure in bar;
Serial N. - the machine serial number;
ISO 9001 - company Quality System Certification;
EC - EC marking.

TRANSPORT, STORAGE AND HANDLING

Conditions for transporting the machine
The tyre changer must be transported in its
original packaging and stowed in the position
shown on the packaging itself.
- Size of packages (Fig. 2):
• Width (B ......................................... 2280 mm
• Depth (A).........................................1700 mm
• Height (C) ........................................1030 mm
HD 1300 / HD 1300 A Operator Manual
42015 - Correggio (RE) Italy
Mod.
V
Code
A
kW
Hz X-XXXXXXXX/XX - XX
Serial N.
Ph
bar/psi
Port.max
XXXXXXXXX
A
ISO9001
QUAL. SYS. CERTIFIED
ANNO DI COSTRUZIONE /
MANUFACTURED
1
EN
C
B
2
79